PartsTable
Technical Data Sheet
Download PDF

NK505CR8-36B0 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NK505CR8-36B0: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L FASTENER, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 1.750 INCHES MINIMUM IN, fastener_length: 2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-285-0525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NK505CR8-36B0
NSN: 5305-01-285-0525
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L FASTENER
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length1.750 INCHES MINIMUM IN
fastener_length2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentOXIDE FASTENER
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
NSN5305-01-285-0525
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NK505CR8-36B0 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
•
THREAD LENGTH: 1.750 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OR QQ-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 STYLE
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD LENGTH1.750 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OR QQ-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2 STYLE
LOCKING FEATUREPELLET THREADS
COLORBLACK FASTENER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
2076323-41Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NK505CR8-36B0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NK505CR8-36B0?
NK505CR8-36B0 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NK505CR8-36B0?
There is 1 known substitute for NK505CR8-36B0: 2076323-41. Substitute compatibility should be verified for your specific system.
What is the NSN for NK505CR8-36B0?
NK505CR8-36B0 is cataloged in the U.S. Government catalog under NSN 5305-01-285-0525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NK505CR8-36B0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.