PartsTable
Technical Data Sheet
Download PDF

NK102347-0250 — FERRULE,GROOVED CLAMP COUPLING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NK102347-0250: FERRULE,GROOVED CLAMP COUPLING.

The FERRULE,GROOVED CLAMP COUPLING is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, flange_length: 0.128 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, overall_length: 0.860 INCHES NOMINAL IN, wall_thickness: 0.064 INCHES NOMINAL IN, special_features: FEMALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL, ferrule_inside_diameter: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-307-9448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NK102347-0250
NSN: 5340-01-307-9448
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialNICKEL OVERALL
flange_length0.128 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
overall_length0.860 INCHES NOMINAL IN
wall_thickness0.064 INCHES NOMINAL IN
special_featuresFEMALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL
ferrule_inside_diameter2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
flange_outside_diameter3.005 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
cross-sectional_shape_styleFLANGED
material_document_and_classificationAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-307-9448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NK102347-0250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: FLANGED
•
WALL THICKNESS: 0.064 INCHES NOMINAL IN
•
FLANGE LENGTH: 0.128 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FERRULE INSIDE DIAMETER: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
MATERIAL: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.860 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGED
WALL THICKNESS0.064 INCHES NOMINAL IN
FLANGE LENGTH0.128 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
FERRULE INSIDE DIAMETER2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
SPECIAL FEATURESFEMALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL
MATERIALNICKEL OVERALL
FLANGE OUTSIDE DIAMETER3.005 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
STM277L250FReference document
Same NSN cross-reference
Reference document — Secondary reference
9850-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2710-250FSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2509972-252Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D35419L250FReference document
Same NSN cross-reference
Reference document — Secondary reference
10113126Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NK102347-0250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NK102347-0250?
NK102347-0250 is a FERRULE,GROOVED CLAMP COUPLING.
What parts can replace NK102347-0250?
There are 8 known substitutes for NK102347-0250: STM277L250F, 9850-7, 2710-250F and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NK102347-0250?
NK102347-0250 is cataloged in the U.S. Government catalog under NSN 5340-01-307-9448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NK102347-0250

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.