PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NK1000064C100
NK1000064C100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 1.585 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.350 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-432-8344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NK1000064C100
NSN: 5330-00-432-8344
FSC: 5330
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter1.585 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.000 INCHES NOMINAL IN
cross-sectional_thickness0.350 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-432-8344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NK1000064C100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.350 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.000 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.585 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL THICKNESS0.350 INCHES NOMINAL IN
APERTURE DIAMETER1.000 INCHES NOMINAL IN
OUTSIDE DIAMETER1.585 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
RB11Interchangeable
interchangeable cross-reference
interchangeable
302060-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NK1000064C100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NK1000064C100?
NK1000064C100 is a GASKET.
What parts can replace NK1000064C100?
There are 2 known substitutes for NK1000064C100: RB11, 302060-1. Substitute compatibility should be verified for your specific system.
What is the NSN for NK1000064C100?
NK1000064C100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-432-8344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NK1000064C100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026