PartsTable
Technical Data Sheet
Download PDF

NJ207MW6C0038 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

NJ207MW6C0038: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 1.3775 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN, overall_width: 0.6643 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN, surface_finish: GROUND, locating_feature: ONE DIRECTION. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-271-0037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NJ207MW6C0038
NSN: 3110-00-271-0037
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter1.3775 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
overall_width0.6643 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
surface_finishGROUND
locating_featureONE DIRECTION
special_featuresSELECTED,CLASSIFIED AND TESTED BY THE ASSEMBLY MFR AT HIS PLANT,INTERNAL CLEARANCE MEASURED UNDER A 11 LB. LOAD LBS
style_designatorSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
internal_clearance0.0006 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
overall_outside_diameter2.8341 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
NSN3110-00-271-0037
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NJ207MW6C0038 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: ONE DIRECTION
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.8341 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0006 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
LOCATING FEATUREONE DIRECTION
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
OVERALL WIDTH0.6643 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.8341 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
SPECIAL FEATURESSELECTED,CLASSIFIED AND TESTED BY THE ASSEMBLY MFR AT HIS PLANT,INTERNAL CLEARANCE MEASURED UNDER A 11 LB. LOAD LBS
BORE DIAMETER1.3775 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
R207G2A1130360C18S7206RReference document
Same NSN cross-reference
Reference document — Secondary reference
BUB0207LAReference document
Same NSN cross-reference
Reference document — Secondary reference
R207G2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
R207G2A1130360C18S5487RReference document
Same NSN cross-reference
Reference document — Secondary reference
468294Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy NJ207MW6C0038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NJ207MW6C0038?
NJ207MW6C0038 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace NJ207MW6C0038?
There are 5 known substitutes for NJ207MW6C0038: R207G2A1130360C18S7206R, BUB0207LA, R207G2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NJ207MW6C0038?
NJ207MW6C0038 is cataloged in the U.S. Government catalog under NSN 3110-00-271-0037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NJ207MW6C0038

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.