PartsTable
Technical Data Sheet
Download PDF

NJ1022C4 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

NJ1022C4: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_shape: STRAIGHT, bore_diameter: 110.00 MILLIMETERS NOMINAL MM, overall_width: 28.00 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: ONE DIRECTION. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-938-6599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NJ1022C4
NSN: 3110-00-938-6599
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_shapeSTRAIGHT
bore_diameter110.00 MILLIMETERS NOMINAL MM
overall_width28.00 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureONE DIRECTION
style_designatorSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, ROLLER RETAINMENT RING ON INNER RING, NON-SEPARABLE
overall_outside_diameter170.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationEXTRA LOOSE
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.1
NSN3110-00-938-6599
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NJ1022C4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: EXTRA LOOSE
•
LOCATING FEATURE: ONE DIRECTION
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, ROLLER RETAINMENT RING ON INNER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 170.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONEXTRA LOOSE
LOCATING FEATUREONE DIRECTION
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, ROLLER RETAINMENT RING ON INNER RING, NON-SEPARABLE
OVERALL WIDTH28.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER170.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER110.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 2
2587116Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
L1022U106Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NJ1022C4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NJ1022C4?
NJ1022C4 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace NJ1022C4?
There are 2 known substitutes for NJ1022C4: 2587116, L1022U106. Substitute compatibility should be verified for your specific system.
What is the NSN for NJ1022C4?
NJ1022C4 is cataloged in the U.S. Government catalog under NSN 3110-00-938-6599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NJ1022C4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.