PartsTable
Technical Data Sheet
Download PDF

NICU-MS16995-95 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NICU-MS16995-95: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLAT CHAMFER, head_height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_length: 1.036 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-177-9727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NICU-MS16995-95
NSN: 5305-01-177-9727
FSC: 5305 — Screws
CAGE: 70318 — ALLMETAL SCREW PRODUCTS CORP (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OVERALL
head_styleFLAT CHAMFER
head_height0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length1.036 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
fastener_length1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.500 INCHES IN
thread_quantity_per_inch13
NSN5305-01-177-9727
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NICU-MS16995-95 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.036 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
HEAD HEIGHT0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
THREAD LENGTH1.036 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA6 TYPE
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
5032918 PIECE 259Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FF-S-86Reference document
Same NSN cross-reference
Reference document — Identification reference
A1JD1840GSFZZ-95Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NICU-MS16995-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NICU-MS16995-95?
NICU-MS16995-95 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NICU-MS16995-95?
There are 3 known substitutes for NICU-MS16995-95: 5032918 PIECE 259, FF-S-86, A1JD1840GSFZZ-95. Substitute compatibility should be verified for your specific system.
What is the NSN for NICU-MS16995-95?
NICU-MS16995-95 is cataloged in the U.S. Government catalog under NSN 5305-01-177-9727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NICU-MS16995-95

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.