PartsTable / COMPONENT / NI14
NI14
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-254-2927, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NI14
NSN: 5340-00-254-2927 FSC: 5340 CAGE: 81074 — ITT HOLUB INDUSTRIES (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.062 INCHES NOMINAL IN loop_inside_diameter 0.875 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 1.031 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.813 INCHES NOMINAL IN NSN 5340-00-254-2927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: NI14
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.813 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 1.031 INCHES NOMINAL IN
• DIAMETER: 0.204 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR SINGLE LOOP CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.813 INCHES NOMINAL IN MATERIAL PLASTIC BAND DISTANCE FROM LOOP CENTER TO TONGUE END 1.031 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN DIAMETER 0.204 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.875 INCHES NOMINAL IN MATERIAL THICKNESS 0.062 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
N-114 Interchangeable interchangeable cross-reference
interchangeable
215-33504-1 Interchangeable interchangeable cross-reference
interchangeable
83319 Interchangeable interchangeable cross-reference
interchangeable
3275497 Interchangeable interchangeable cross-reference
interchangeable
M1069 Interchangeable interchangeable cross-reference
interchangeable
1160274-4 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy NI14?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NI14?
NI14 is a CLAMP,LOOP.
What parts can replace NI14?
There are 18 known substitutes for NI14: N-114, 215-33504-1, 83319 and 15 more. Substitute compatibility should be verified for your specific system.
Is NI14 still available?
NI14 is currently cancelled.