PartsTable
Technical Data Sheet
NHAL802-187CRESPIN ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 2.000 INCHES NOMINAL IN, knuckle_type: FRICTION, pin_removability: NONREMOVABLE, special_features: 0.187 IN. DIA PIN IN, style_designator: BUTT.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5810, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NHAL802-187CRESPIN
NSN: 5340-00-008-5810
FSC: 5340
CAGE: 03007 — H. A. GUDEN COMPANY, INC. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width2.000 INCHES NOMINAL IN
knuckle_typeFRICTION
knuckle_quantity2
pin_removabilityNONREMOVABLE
special_features0.187 IN. DIA PIN IN
style_designatorBUTT
material_thickness0.075 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
pin_center_to_body_edge_distance0.844 INCHES NOMINAL IN
NSN5340-00-008-5810
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NHAL802-187CRESPIN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL THICKNESS: 0.075 INCHES NOMINAL IN
HINGE MOUNTING TYPE: FULL SURFACE
KNUCKLE QUANTITY: 2
PIN CENTER TO BODY EDGE DISTANCE: 0.844 INCHES NOMINAL IN
STYLE DESIGNATOR: BUTT
KNUCKLE TYPE: FRICTION
REVERSIBLE FEATURE: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.075 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
KNUCKLE QUANTITY2
SPECIAL FEATURES0.187 IN. DIA PIN IN
PIN CENTER TO BODY EDGE DISTANCE0.844 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
KNUCKLE TYPEFRICTION
REVERSIBLE FEATURENOT INCLUDED
MATERIALUNABLE TO DECODE
PIN REMOVABILITYNONREMOVABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
4057093Interchangeable
interchangeable cross-reference
interchangeable
1176Interchangeable
interchangeable cross-reference
interchangeable
AW47Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NHAL802-187CRESPIN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NHAL802-187CRESPIN?
NHAL802-187CRESPIN is a HINGE,BUTT.
What parts can replace NHAL802-187CRESPIN?
There are 3 known substitutes for NHAL802-187CRESPIN: 4057093, 1176, AW47. Substitute compatibility should be verified for your specific system.
What is the NSN for NHAL802-187CRESPIN?
NHAL802-187CRESPIN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NHAL802-187CRESPIN