PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NH7029PC1280
NH7029PC1280 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE AND PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL, outside_diameter: 1.125 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-252-3882, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NH7029PC1280
NSN: 5330-00-252-3882
FSC: 5330
CAGE: 82328 — DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE (USA)
SPECIFICATIONS
materialCELLULOSE AND PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
outside_diameter1.125 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.875 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-252-3882
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NH7029PC1280 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: CELLULOSE AND PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCELLULOSE AND PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
APERTURE DIAMETER0.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
756508Interchangeable
interchangeable cross-reference
interchangeable
468326Interchangeable
interchangeable cross-reference
interchangeable
756507Interchangeable
interchangeable cross-reference
interchangeable
34566C6Interchangeable
interchangeable cross-reference
interchangeable
3253398Interchangeable
interchangeable cross-reference
interchangeable
AN6227B22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NH7029PC1280?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NH7029PC1280?
NH7029PC1280 is a GASKET.
What parts can replace NH7029PC1280?
There are 22 known substitutes for NH7029PC1280: 756508, 468326, 756507 and 19 more. Substitute compatibility should be verified for your specific system.
Is NH7029PC1280 still available?
NH7029PC1280 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NH7029PC1280

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026