PartsTable
Technical Data Sheet
Download PDF

NH1005237 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NH1005237: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.750 INCHES NOMINAL IN, style_designator: T-BOLT, material_diameter: 0.031 INCHES NOMINAL IN, loop_inside_diameter: 6.720 INCHES NOMINAL IN, end_item_identification: W/S:TANK,ABRAMS M-1; TANK, COMBAT,FT,120MM GUN (M1A1) MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-139-3747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NH1005237
NSN: 5340-01-139-3747
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.750 INCHES NOMINAL IN
style_designatorT-BOLT
material_diameter0.031 INCHES NOMINAL IN
loop_inside_diameter6.720 INCHES NOMINAL IN
end_item_identificationW/S:TANK,ABRAMS M-1; TANK, COMBAT,FT,120MM GUN (M1A1) MM
NSN5340-01-139-3747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NH1005237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
LOOP INSIDE DIAMETER: 6.720 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.031 INCHES NOMINAL IN
STYLE DESIGNATORT-BOLT
OVERALL WIDTH0.750 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S:TANK,ABRAMS M-1; TANK, COMBAT,FT,120MM GUN (M1A1) MM
MATERIALSTEEL CORROSION RESISTING OVERALL
LOOP INSIDE DIAMETER6.720 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12310653Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NH1005237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NH1005237?
NH1005237 is a CLAMP,LOOP.
What parts can replace NH1005237?
There is 1 known substitute for NH1005237: 12310653. Substitute compatibility should be verified for your specific system.
What is the NSN for NH1005237?
NH1005237 is cataloged in the U.S. Government catalog under NSN 5340-01-139-3747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NH1005237