PartsTable
Technical Data Sheet
Download PDF

NH100-101-116-06 — HOSE,AIR DUCT

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

NH100-101-116-06: HOSE,AIR DUCT.

The HOSE,AIR DUCT is a the manufacturer industrial component. Key specifications include material: FIBERGLASS AND RUBBER CHLOROPRENE CLASS CR SECOND PLY, wall_thickness: 0.080 INCHES NOMINAL IN, connection_type: SOFT BOTH ENDS, inside_diameter: 1.250 INCHES NOMINAL FIRST END IN, connection_style: ROUND BOTH ENDS, style_designator: HELICALLY WOUND CONTINOUS WIRE SUPPORTED. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-051-3667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NH100-101-116-06
NSN: 4720-00-051-3667
FSC: 4720 — Hose and Flexible Tubing
CAGE: 16632 — FLEXFAB LLC (USA)
SPECIFICATIONS
materialFIBERGLASS AND RUBBER CHLOROPRENE CLASS CR SECOND PLY
wall_thickness0.080 INCHES NOMINAL IN
connection_typeSOFT BOTH ENDS
inside_diameter1.250 INCHES NOMINAL FIRST END IN
connection_styleROUND BOTH ENDS
style_designatorHELICALLY WOUND CONTINOUS WIRE SUPPORTED
end_overall_length1.500 INCHES NOMINAL BOTH ENDS IN
operating_pressure40.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
end_inside_diameter1.250 INCHES NOMINAL BOTH ENDS IN
cross-sectional_shape_styleROUND
measuring_method_and_length29.000 INCHES NOMINAL OVERALL IN
minimum_inside_bending_radius0.416 INCHES IN
NSN4720-00-051-3667
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: NH100-101-116-06 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 29.000 INCHES NOMINAL OVERALL IN
•
MINIMUM INSIDE BENDING RADIUS: 0.416 INCHES IN
•
CONNECTION STYLE: ROUND BOTH ENDS
•
CONNECTION TYPE: SOFT BOTH ENDS
•
STYLE DESIGNATOR: HELICALLY WOUND CONTINOUS WIRE SUPPORTED
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
WALL THICKNESS: 0.080 INCHES NOMINAL IN
•
OPERATING PRESSURE: 40.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH29.000 INCHES NOMINAL OVERALL IN
MINIMUM INSIDE BENDING RADIUS0.416 INCHES IN
CONNECTION STYLEROUND BOTH ENDS
CONNECTION TYPESOFT BOTH ENDS
STYLE DESIGNATORHELICALLY WOUND CONTINOUS WIRE SUPPORTED
CROSS-SECTIONAL SHAPE STYLEROUND
WALL THICKNESS0.080 INCHES NOMINAL IN
OPERATING PRESSURE40.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
INSIDE DIAMETER1.250 INCHES NOMINAL FIRST END IN
END OVERALL LENGTH1.500 INCHES NOMINAL BOTH ENDS IN
SUBSTITUTES & CROSS-REFERENCES 7
FT-350-5-58Reference document
Same NSN cross-reference
Reference document — Secondary reference
CEEDT-5-116-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
ONH100-101-116-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
FLEXFLYTE LR-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
FLX1001Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
FLEXFLYTE L-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NH100-101-116-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NH100-101-116-06?
NH100-101-116-06 is a HOSE,AIR DUCT.
What parts can replace NH100-101-116-06?
There are 7 known substitutes for NH100-101-116-06: FT-350-5-58, CEEDT-5-116-6, ONH100-101-116-6 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NH100-101-116-06?
NH100-101-116-06 is cataloged in the U.S. Government catalog under NSN 4720-00-051-3667. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NH100-101-116-06

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.