PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NH06C016
NH06C016 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OR STEEL COMP 410 OR STEEL COMP 416 OUTER LAYER, corner_shape: SQUARE ALL CORNERS, overall_length: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-030-0080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NH06C016
NSN: 3120-00-030-0080
FSC: 3120
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OR STEEL COMP 410 OR STEEL COMP 416 OUTER LAYER
corner_shapeSQUARE ALL CORNERS
overall_length0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
hardness_rating27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.3755 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM IN
body_outside_diameter0.5007 INCHES MINIMUM AND 0.5012 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
NSN3120-00-030-0080
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: NH06C016 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
•
HARDNESS RATING: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
•
SURFACE FINISH: 125.0 MICROINCHES RIGHT END SURFACE OF BODY
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
HARDNESS RATING27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
MATERIALSTEEL COMP 630 OR STEEL COMP 410 OR STEEL COMP 416 OUTER LAYER
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CORNER SHAPESQUARE ALL CORNERS
OVERALL LENGTH0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
NAS537Interchangeable
interchangeable cross-reference
interchangeable
M81934/1-06C016Interchangeable
interchangeable cross-reference
interchangeable
SAEAS81934Interchangeable
interchangeable cross-reference
interchangeable
NAS538Interchangeable
interchangeable cross-reference
interchangeable
AS81934/1Interchangeable
interchangeable cross-reference
interchangeable
NAS538-10P054Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NH06C016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NH06C016?
NH06C016 is a BEARING,SLEEVE.
What parts can replace NH06C016?
There are 33 known substitutes for NH06C016: NAS537, M81934/1-06C016, SAEAS81934 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NH06C016?
NH06C016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-030-0080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NH06C016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026