NGN500BA-3-100 — NUT,PLAIN,PLATE

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

NGN500BA-3-100: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING LOCKING INSERT, nut_style: PLATE, nut_height: 1.400 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN, nut_length: 1.460 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, plate_width: 1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-702-7908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NGN500BA-3-100

NSN: 5310-01-702-7908
FSC: 5310 — Nuts and Washers
CAGE: 1SFN4 — NORTHROP GRUMMAN SYSTEMS CORP INTEGRATED SYSTEMS SECTOR (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING LOCKING INSERT
nut_style	PLATE
nut_height	1.400 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN
nut_length	1.460 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
lubrication	DRY FILM LUBRICANT
plate_width	1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
plate_thickness	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
special_features	NUT BORE DIA IS 0.196 INCHES (MIN) AND 0.203 INCHES (MAX) IN
thread_direction	RIGHT-HAND
surface_treatment	ANODIZE BASE
nominal_thread_size	0.190 INCHES IN
hole_type_and_quantity	1 DRILLED
NSN	5310-01-702-7908

COMPONENT DIAGRAM

KEY FEATURES

•

LUBRICATION: DRY FILM LUBRICANT

•

PLATE THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

NUT LENGTH: 1.460 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TY 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BASE

•

DISTANCE FROM MOUNTING HOLE CENTER TO BASE: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN

•

PLATE WIDTH: 1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN

•

MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES

•

DISTANCE FROM BASE TO CENTER OF APERTURE: 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

LUBRICATION	DRY FILM LUBRICANT
PLATE THICKNESS	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NUT LENGTH	1.460 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625, TY 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BASE
DISTANCE FROM MOUNTING HOLE CENTER TO BASE	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
PLATE WIDTH	1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE	0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-367 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B247 ASSN STD SINGLE MATERIAL RESPONSE BASE
MATERIAL DOCUMENT AND CLASSIFICATION	NAS-8846 NATIONAL STD SINGLE MATERIAL RESPONSE LOCKING INSERT

SUBSTITUTES & CROSS-REFERENCES 1

NGN500BASame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NGN500BA-3-100?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NGN500BA-3-100?

NGN500BA-3-100 is a NUT,PLAIN,PLATE.

What parts can replace NGN500BA-3-100?

There is 1 known substitute for NGN500BA-3-100: NGN500BA. Substitute compatibility should be verified for your specific system.

What is the NSN for NGN500BA-3-100?

NGN500BA-3-100 is cataloged in the U.S. Government catalog under NSN 5310-01-702-7908. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NGN500BA-3-100 — NUT,PLAIN,PLATE

Request a Quote — NGN500BA-3-100