The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, overall_width: 0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN, overall_length: 2.364 INCHES MINIMUM AND 2.384 INCHES MAXIMUM IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-705-8154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NGC500EG-6B3
NSN:5340-01-705-8154 FSC:5340 — Hardware, Commercial CAGE:76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)
SPECIFICATIONS
material
PLASTIC
block_height
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
overall_width
0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
overall_length
2.364 INCHES MINIMUM AND 2.384 INCHES MAXIMUM IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)
clamping_hole_quantity
1
mounting_hole_diameter
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
mounting_hole_quantity
2
end_item_identification
SPECIAL, AIR VEHICLE, AIRCRAFT
material_document_and_classification
ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
distance_from_end_to_first_clamping_hole_center
1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
NSN
5340-01-705-8154
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
CLAMPING HOLE QUANTITY: 1
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
•
BLOCK HEIGHT: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
2
CLAMPING HOLE QUANTITY
1
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
BLOCK HEIGHT
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
OVERALL LENGTH
2.364 INCHES MINIMUM AND 2.384 INCHES MAXIMUM IN
OVERALL WIDTH
0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
0.278 INCHES MINIMUM AND 0.298 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NGC500EG-6B3?
NGC500EG-6B3 is a CLAMP,BLOCK.
What parts can replace NGC500EG-6B3?
There is 1 known substitute for NGC500EG-6B3: NGC500EG. Substitute compatibility should be verified for your specific system.
What is the NSN for NGC500EG-6B3?
NGC500EG-6B3 is cataloged in the U.S. Government catalog under NSN 5340-01-705-8154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.