The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, overall_width: 0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN, overall_length: 4.114 INCHES MINIMUM AND 4.134 INCHES MAXIMUM IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-705-8042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NGC500EG-4C1
NSN:5340-01-705-8042 FSC:5340 — Hardware, Commercial CAGE:76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)
SPECIFICATIONS
material
PLASTIC
block_height
0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
overall_width
0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
overall_length
4.114 INCHES MINIMUM AND 4.134 INCHES MAXIMUM IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)
clamping_hole_quantity
2
mounting_hole_diameter
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
mounting_hole_quantity
3
end_item_identification
SPECIAL, AIR VEHICLE, AIRCRAFT
material_document_and_classification
ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
distance_from_end_to_first_clamping_hole_center
1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
NSN
5340-01-705-8042
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 3
•
CLAMPING HOLE QUANTITY: 2
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
•
BLOCK HEIGHT: 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
3
CLAMPING HOLE QUANTITY
2
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
BLOCK HEIGHT
0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D4086, PA12630 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
OVERALL LENGTH
4.114 INCHES MINIMUM AND 4.134 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
3.302 INCHES MINIMUM AND 3.322 INCHES MAXIMUM IN
OVERALL WIDTH
0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NGC500EG-4C1?
NGC500EG-4C1 is a CLAMP,BLOCK.
What parts can replace NGC500EG-4C1?
There is 1 known substitute for NGC500EG-4C1: NGC500EG. Substitute compatibility should be verified for your specific system.
What is the NSN for NGC500EG-4C1?
NGC500EG-4C1 is cataloged in the U.S. Government catalog under NSN 5340-01-705-8042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.