The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.630 INCHES NOMINAL IN, overall_width: 0.394 INCHES NOMINAL IN, overall_length: 1.562 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-707-7535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NGC500EG-4A1
NSN:5340-01-707-7535 FSC:5340 — Hardware, Commercial CAGE:76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)
SPECIFICATIONS
material
PLASTIC
block_height
0.630 INCHES NOMINAL IN
overall_width
0.394 INCHES NOMINAL IN
overall_length
1.562 INCHES NOMINAL IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)
clamping_hole_diameter
0.254 INCHES MINIMUM AND 0.262 INCHES MAXIMUM ALL HOLES IN
clamping_hole_quantity
2
mounting_hole_diameter
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
mounting_hole_quantity
1
end_item_identification
SPECIAL, AIR VEHICLE, AIRCRAFT
material_document_and_classification
ASTM D4066,PA012G30,NATURAL COLOR ALTERNATE MATERIAL NYLON 6/6 40 PERCENT GLASS REINFORCED AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE
NSN
5340-01-707-7535
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
CLAMPING HOLE QUANTITY: 2
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.375 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.630 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066,PA012G30,NATURAL COLOR ALTERNATE MATERIAL NYLON 6/6 40 PERCENT GLASS REINFORCED AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
1
CLAMPING HOLE QUANTITY
2
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.375 INCHES NOMINAL IN
BLOCK HEIGHT
0.630 INCHES NOMINAL IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D4066,PA012G30,NATURAL COLOR ALTERNATE MATERIAL NYLON 6/6 40 PERCENT GLASS REINFORCED AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
OVERALL LENGTH
1.562 INCHES NOMINAL IN
OVERALL WIDTH
0.394 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER
0.254 INCHES MINIMUM AND 0.262 INCHES MAXIMUM ALL HOLES IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NGC500EG-4A1?
NGC500EG-4A1 is a CLAMP,BLOCK,SECTION.
What parts can replace NGC500EG-4A1?
There is 1 known substitute for NGC500EG-4A1: NGC500EG. Substitute compatibility should be verified for your specific system.
What is the NSN for NGC500EG-4A1?
NGC500EG-4A1 is cataloged in the U.S. Government catalog under NSN 5340-01-707-7535. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.