PartsTable
Technical Data Sheet
Download PDF

ND90283PC30 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ND90283PC30: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.762 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, overall_height: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, hardness_rating: 82.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 85.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM, outside_diameter: 1.214 INCHES MINIMUM AND 1.224 INCHES MAXIMUM IN, material_thickness: 0.010 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-312-4806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ND90283PC30
NSN: 5310-00-312-4806
FSC: 5310 — Nuts and Washers
CAGE: 44541 — MAGNETICS INTL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.762 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
overall_height0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
hardness_rating82.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 85.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
outside_diameter1.214 INCHES MINIMUM AND 1.224 INCHES MAXIMUM IN
material_thickness0.010 INCHES NOMINAL IN
material_document_and_classificationMIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-312-4806
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ND90283PC30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 82.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 85.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.214 INCHES MINIMUM AND 1.224 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.762 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
HARDNESS RATING82.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 85.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.214 INCHES MINIMUM AND 1.224 INCHES MAXIMUM IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.762 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
ND90291PC28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ND90452PC27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ND90346PC30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ND90280PC30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ND90285PC28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ND90454PC27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ND90283PC30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ND90283PC30?
ND90283PC30 is a WASHER,SPRING TENSION.
What parts can replace ND90283PC30?
There are 10 known substitutes for ND90283PC30: ND90291PC28, ND90452PC27, ND90346PC30 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ND90283PC30?
ND90283PC30 is cataloged in the U.S. Government catalog under NSN 5310-00-312-4806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ND90283PC30