PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ND26205-172
ND26205-172 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_length: 0.312 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-282-5534, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ND26205-172
NSN: 5305-00-282-5534
FSC: 5305
CAGE: 65092 — SOLARTRON ELECTRONICS INC WESTON INSTRUMENTS DIV (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_length0.312 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch80
NSN5305-00-282-5534
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ND26205-172 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FILLISTER
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD LENGTH: 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFILLISTER
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
HEAD DIAMETER0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
HEAD HEIGHT0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD LENGTH0.312 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
9678M39P01Interchangeable
interchangeable cross-reference
interchangeable
64446Interchangeable
interchangeable cross-reference
interchangeable
64648Interchangeable
interchangeable cross-reference
interchangeable
MS400/C/H0RInterchangeable
interchangeable cross-reference
interchangeable
M325Interchangeable
interchangeable cross-reference
interchangeable
81820Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ND26205-172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ND26205-172?
ND26205-172 is a SCREW,MACHINE.
What parts can replace ND26205-172?
There are 13 known substitutes for ND26205-172: 9678M39P01, 64446, 64648 and 10 more. Substitute compatibility should be verified for your specific system.
Is ND26205-172 still available?
ND26205-172 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ND26205-172

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026