PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ND17HN01
ND17HN01 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6712, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ND17HN01
NSN: 3110-00-156-6712
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width10.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
overall_outside_diameter40.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6712
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: ND17HN01 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
•
OVERALL OUTSIDE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
MATERIALSTEEL OUTER RING
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER40.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
BORE DIAMETER17.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
70-59Interchangeable
interchangeable cross-reference
interchangeable
LRL50N-MInterchangeable
interchangeable cross-reference
interchangeable
WC586Interchangeable
interchangeable cross-reference
interchangeable
L-17Interchangeable
interchangeable cross-reference
interchangeable
W-1050-TInterchangeable
interchangeable cross-reference
interchangeable
L-17-2592Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ND17HN01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ND17HN01?
ND17HN01 is a BEARING,BALL,ANNULAR.
What parts can replace ND17HN01?
There are 18 known substitutes for ND17HN01: 70-59, LRL50N-M, WC586 and 15 more. Substitute compatibility should be verified for your specific system.
Is ND17HN01 still available?
ND17HN01 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ND17HN01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026