PartsTable
Technical Data Sheet
Download PDF

ND1414 — NUT,PLAIN,WELDING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ND1414: NUT,PLAIN,WELDING.

The NUT,PLAIN,WELDING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLAIN WELDING, nut_length: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-015-6871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ND1414
NSN: 5310-01-015-6871
FSC: 5310 — Nuts and Washers
CAGE: 76871 — OHIO NUT AND BOLT CO DIV OF FASTENER INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLAIN WELDING
nut_length0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
NSN5310-01-015-6871
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ND1414 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
NUT LENGTH: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT THICKNESS: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
NUT STYLE: PLAIN WELDING
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
NUT LENGTH0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT THICKNESS0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
NUT STYLEPLAIN WELDING
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
UPE61-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy ND1414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ND1414?
ND1414 is a NUT,PLAIN,WELDING.
What parts can replace ND1414?
There is 1 known substitute for ND1414: UPE61-001. Substitute compatibility should be verified for your specific system.
What is the NSN for ND1414?
ND1414 is cataloged in the U.S. Government catalog under NSN 5310-01-015-6871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ND1414

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.