PartsTable
Technical Data Sheet
Download PDF

ND120 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

ND120: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL SHAFT, tooth_form: STANDARD, handle_color: YELLOW, overall_length: 7.250 INCHES NOMINAL IN, pitch_diameter: 10.0000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 5120-00-542-4571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ND120
NSN: 5120-00-542-4571
NIINs: 005424571, 009194857, 013351014
FSC: 5120 — Hand Tools, Nonedged, Nonpowered
CAGE: C7127 — SNA GERMANY GMBH (DEU)
SPECIFICATIONS
materialSTEEL SHAFT
tooth_formSTANDARD
handle_colorYELLOW
overall_length7.250 INCHES NOMINAL IN
pitch_diameter10.0000 INCHES NOMINAL IN
pressure_angle14.5000 DEGREES
teeth_quantity120
special_featuresYELLOW SHANK; 1/2 IN. BOLT CLEARANCE DIA; SQUARE HANDLE IN
style_designatorONE PROTRUDING HUB, ONE FLUSH HUB
attachment_methodMOUNTING HOLE
features_providedHOLLOW SHAFT
face_nominal_width0.750 INCHES IN
NSN5120-00-542-4571
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN ND120 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
WRENCHING SURFACE SIZE: 0.625 INCHES NOMINAL SINGLE END IN
•
SPECIFICATION/STANDARD DATA: 05047-ASME B107.12 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS AND A STYLE
•
WRENCHING SURFACE SHAPE: HEXAGON SINGLE END
•
MATERIAL: PLASTIC HANDLE
TECHNICAL CHARACTERISTICS
WRENCHING SURFACE SIZE0.625 INCHES NOMINAL SINGLE END IN
OVERALL LENGTH7.000 INCHES MINIMUM IN
SPECIFICATION/STANDARD DATA05047-ASME B107.12 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS AND A STYLE
WRENCHING SURFACE SHAPEHEXAGON SINGLE END
MATERIALPLASTIC HANDLE
MATERIALSTEEL SHAFT
SUBSTITUTES & CROSS-REFERENCES 8
3420Reference document
Same NSN cross-reference
Reference document — Secondary reference
892710-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A-A-2382Reference document
Same NSN cross-reference
Reference document — Secondary reference
GGG-W-657 TY1Reference document
Same NSN cross-reference
Reference document — Secondary reference
B107.12 TY1CL1STAReference document
Same NSN cross-reference
Reference document — Secondary reference
B107.12Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ND120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ND120?
ND120 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace ND120?
There are 8 known substitutes for ND120: 3420, 892710-000, A-A-2382 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ND120?
ND120 is cataloged in the U.S. Government catalog under NSN 5120-00-542-4571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ND120