PartsTable
Technical Data Sheet
Download PDF

NC3020-46 — BEARING,BALL,LINEAR MOTION

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

NC3020-46: BEARING,BALL,LINEAR MOTION.

The BEARING,BALL,LINEAR MOTION is a the manufacturer industrial component. Key specifications include overall_length: 1.2350 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, surface_finish: GROUND, working_bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_outside_diameter: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-2801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NC3020-46
NSN: 3110-00-198-2801
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
overall_length1.2350 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
surface_finishGROUND
working_bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_outside_diameter0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
NSN3110-00-198-2801
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NC3020-46 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WORKING BORE DIAMETER: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WORKING BORE DIAMETER0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
SURFACE FINISHGROUND
OVERALL LENGTH1.2350 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
7406191P2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
18-20272-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
302-1086P2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
55875Reference document
Same NSN cross-reference
Reference document — Secondary reference
272192Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NC3020-46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NC3020-46?
NC3020-46 is a BEARING,BALL,LINEAR MOTION.
What parts can replace NC3020-46?
There are 9 known substitutes for NC3020-46: 7406191P2, LB, 18-20272-1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NC3020-46?
NC3020-46 is cataloged in the U.S. Government catalog under NSN 3110-00-198-2801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NC3020-46