PartsTable
Technical Data Sheet
Download PDF

NAVYX2103APC10 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

NAVYX2103APC10: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 2.4375 INCHES MINIMUM AND 2.4381 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 2.5580 INCHES MINIMUM AND 2.5630 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-107-9967, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAVYX2103APC10
NSN: 3110-00-107-9967
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 31974 — HOFFMAN/NEW YORKER, INC. (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter2.4375 INCHES MINIMUM AND 2.4381 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width2.5580 INCHES MINIMUM AND 2.5630 INCHES MAXIMUM IN
outer_ring_width1.2500 INCHES NOMINAL IN
special_featuresSET SCREW IN INNER RING
style_designatorSINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
NSN3110-00-107-9967
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NAVYX2103APC10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: LABYRINTH
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING
•
OVERALL OUTSIDE DIAMETER: 4.3299 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPELABYRINTH
LUBRICATION MATERIALGREASE
OUTER RING WIDTH1.2500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING
OVERALL OUTSIDE DIAMETER4.3299 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSET SCREW IN INNER RING
SUBSTITUTES & CROSS-REFERENCES 1
2-27Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAVYX2103APC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAVYX2103APC10?
NAVYX2103APC10 is a BEARING,BALL,ANNULAR.
What parts can replace NAVYX2103APC10?
There is 1 known substitute for NAVYX2103APC10: 2-27. Substitute compatibility should be verified for your specific system.
What is the NSN for NAVYX2103APC10?
NAVYX2103APC10 is cataloged in the U.S. Government catalog under NSN 3110-00-107-9967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAVYX2103APC10