PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NASM90725-61
NASM90725-61 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, fastener_length: 1.125 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-543-5411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM90725-61
NSN: 5305-01-543-5411
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_between_flats0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
nominal_thread_diameter0.375 INCHES IN
minimum_tensile_strength9300 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch16
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-543-5411
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NASM90725-61 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HEAD STYLE: HEXAGON
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.375 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
HEAD STYLEHEXAGON
FASTENER LENGTH1.125 INCHES NOMINAL IN
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH16
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
MS90725-61Interchangeable
interchangeable cross-reference
interchangeable
5305002693212Interchangeable
interchangeable cross-reference
interchangeable
MS90728-61Interchangeable
interchangeable cross-reference
interchangeable
S172BInterchangeable
interchangeable cross-reference
interchangeable
13207E3409FN63Interchangeable
interchangeable cross-reference
interchangeable
MS35291-061Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NASM90725-61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM90725-61?
NASM90725-61 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace NASM90725-61?
There are 6 known substitutes for NASM90725-61: MS90725-61, 5305002693212, MS90728-61 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM90725-61?
NASM90725-61 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-543-5411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM90725-61

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026