PartsTable
Technical Data Sheet
Download PDF

NASM35206 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NASM35206: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, thread_class: 2A A, document_type: INTERNATIONAL ORGANIZATION FOR STANDARDIZATION, head_diameter: 0.594 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN, thread_length: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-889-2997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM35206
NSN: 5305-00-889-2997
NIINs: 008892997, 009844983, 009844989, 009844992, 009846189, 009846207, 009846211, 009846212, 009881721, 009881723, 015987940, 016667724, 016720239, 016995186
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
thread_class2A A
document_typeINTERNATIONAL ORGANIZATION FOR STANDARDIZATION
head_diameter0.594 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
thread_length0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
special_featuresFLIGHT SAFETY CRITICAL AIRCRAFT PART
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE II
head_surface_treatmentCADMIUM
NSN5305-00-889-2997
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NASM35206 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.375 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 9
N80P9006Q3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS35206-215Reference document
Same NSN cross-reference
Reference document — Secondary reference
558363-17Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AN515-4-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
132636Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
946119-2406Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy NASM35206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM35206?
NASM35206 is a SCREW,MACHINE.
What parts can replace NASM35206?
There are 9 known substitutes for NASM35206: N80P9006Q3, MS35206-215, 558363-17 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM35206?
NASM35206 is cataloged in the U.S. Government catalog under NSN 5305-00-889-2997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM35206

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.