PartsTable
Technical Data Sheet
Download PDF

NASM24671-57 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NASM24671-57: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, thread_length: 1.250 INCHES NOMINAL IN, fastener_length: 2.250 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-682-5883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM24671-57
NSN: 5305-01-682-5883
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
thread_length1.250 INCHES NOMINAL IN
fastener_length2.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
width_across_flats0.219 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identificationAN/ASQ-235
NSN5305-01-682-5883
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NASM24671-57 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.219 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.250 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.219 INCHES NOMINAL IN
FASTENER LENGTH2.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.250 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
8485940/FN17Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NASM24671-57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM24671-57?
NASM24671-57 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NASM24671-57?
There is 1 known substitute for NASM24671-57: 8485940/FN17. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM24671-57?
NASM24671-57 is cataloged in the U.S. Government catalog under NSN 5305-01-682-5883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM24671-57

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.