NASM20426AD6-11A: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2117 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), head_height: 0.070 INCHES NOMINAL IN, shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, heat_treatment: T-4 SOLUTION HEAT TREATED OVERALL, shank_diameter: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-628-4109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 2117 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| head_height | 0.070 INCHES NOMINAL IN |
| shank_style | STRAIGHT W/RADIUS CHAMFERED TIP |
| heat_treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| shank_diameter | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| fastener_length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| special_features | MATERIAL IDENTIFICATION MARK ON HEAD OF RIVET IS A CIRCULAR SHAPE THAT IS 0.030 INCHES MAXIMUM DIAMETER IN |
| countersink_angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| surface_treatment | ANODIZE OVERALL |
| head_major_diameter | 0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN |
| end_item_identification | 4910-01-539-6129 |
| NSN | 5320-01-628-4109 |
| SHANK DIAMETER | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| HEAD HEIGHT | 0.070 INCHES NOMINAL IN |
| FASTENER LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE II,CLASS 1,CLEAR MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 80205-NAS-20426 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SPECIAL FEATURES | MATERIAL IDENTIFICATION MARK ON HEAD OF RIVET IS A CIRCULAR SHAPE THAT IS 0.030 INCHES MAXIMUM DIAMETER IN |