PartsTable
Technical Data Sheet
Download PDF

NASM20392 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NASM20392: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.093 INCHES NOMINAL IN, diameter: 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM IN, material: SILVER ALLOY OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.078 INCHES NOMINAL IN, shear_strength: 4360 DOUBLE POUND.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-014-8431, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM20392
NSN: 5315-00-014-8431
NIINs: 000148431, 000642699, 008123765, 009041645, 009041654, 009041657, 009054450, 009570763, 010766506, 014158711, 014464205, 015179766, 015317330, 015430303, 015637267, 016110353, 016711199, 016711200, 016711201, 016711225, 016712115, 016715773, 016794068, 016809517, 016809518, 016809521, 017185457, 017228011, 017228016
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
height0.093 INCHES NOMINAL IN
diameter0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM IN
materialSILVER ALLOY OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length0.078 INCHES NOMINAL IN
shear_strength4360 DOUBLE POUND
hardness_rating26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
special_featuresPIN STRAIGHT HEADED DRILLED SHANK
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.747 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
NSN5315-00-014-8431
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NASM20392 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
NASM5673Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS20392-3C75Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NASM20392?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM20392?
NASM20392 is a PIN,STRAIGHT,HEADED.
What parts can replace NASM20392?
There are 2 known substitutes for NASM20392: NASM5673, MS20392-3C75. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM20392?
NASM20392 is cataloged in the U.S. Government catalog under NSN 5315-00-014-8431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM20392

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.