PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NASM16995
NASM16995 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN, point_style: CONE, thread_class: 3A A, chamfer_angle: 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-988-7604, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM16995
NSN: 5305-00-988-7604
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
point_styleCONE
thread_class3A A
chamfer_angle30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
head_diameter0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
special_featuresHEAD PERIPHERY MAY BE KNURLED AT MANUFACTURERS OPTION
thread_directionRIGHT-HAND
NSN5305-00-988-7604
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NASM16995 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 3A A
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THREAD QUANTITY PER INCH: 32
•
WIDTH ACROSS FLATS: 0.101 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A A
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.101 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
NOMINAL THREAD DIAMETER0.164 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
MS16995-29Interchangeable
interchangeable cross-reference
interchangeable
192408092Interchangeable
interchangeable cross-reference
interchangeable
2422399-39Interchangeable
interchangeable cross-reference
interchangeable
5305009887834Interchangeable
interchangeable cross-reference
interchangeable
358-12180Interchangeable
interchangeable cross-reference
interchangeable
001-000434-008Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NASM16995?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM16995?
NASM16995 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NASM16995?
There are 27 known substitutes for NASM16995: MS16995-29, 192408092, 2422399-39 and 24 more. Substitute compatibility should be verified for your specific system.
Is NASM16995 still available?
NASM16995 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM16995

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026