PartsTable
Technical Data Sheet
Download PDF

NAS965 TYDSZ40 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

NAS965 TYDSZ40: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL ALLOY OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: EXTERNALLY THREADED W/HEX NUT, flute_length: 1.125 INCHES NOMINAL IN, overall_length: 2.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-01-118-5942, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS965 TYDSZ40
NSN: 5133-01-118-5942
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleEXTERNALLY THREADED W/HEX NUT
flute_length1.125 INCHES NOMINAL IN
flute_quantity2
overall_length2.125 INCHES NOMINAL IN
thread_quantity28 PER INCH
special_featuresHSS/COBALT, EXTERNALLY THREADED SQUARE SHANK W/SHANK SQUARE NUT; LONG LENGTH
cutting_end_styleGENERAL PURPOSE
nominal_thread_diameter0.250 INCHES IN
nominal_cutting_diameter0.0980 INCHES IN
NSN5133-01-118-5942
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN NAS965 TYDSZ40 MFR DRILL,TWIST
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 1.125 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.0980 INCHES IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS965 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: D TYPE AND 40 SIZE
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH1.125 INCHES NOMINAL IN
OVERALL LENGTH2.125 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.0980 INCHES IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS965 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAD TYPE AND 40 SIZE
SHANK STYLEEXTERNALLY THREADED W/HEX NUT
FLUTE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 3
NAS965Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
3952 40Reference document
Same NSN cross-reference
Reference document — Secondary reference
038856TSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NAS965 TYDSZ40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS965 TYDSZ40?
NAS965 TYDSZ40 is a DRILL,TWIST.
What parts can replace NAS965 TYDSZ40?
There are 3 known substitutes for NAS965 TYDSZ40: NAS965, 3952 40, 038856TS. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS965 TYDSZ40?
NAS965 TYDSZ40 is cataloged in the U.S. Government catalog under NSN 5133-01-118-5942. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS965 TYDSZ40

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.