PartsTable
Technical Data Sheet

NAS907 TYFSZ7/32 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

NAS907 TYFSZ7/32: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL ALLOY OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 1.250 INCHES NOMINAL IN, overall_length: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-01-095-6721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS907 TYFSZ7/32
NSN: 5133-01-095-6721
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.250 INCHES NOMINAL IN
flute_quantity2
overall_length2.375 INCHES NOMINAL IN
shank_diameter0.219 INCHES NOMINAL IN
special_featuresSCREW MACHINE LG; FRACTIONAL SIZE 7/32
cutting_end_styleGENERAL PURPOSE
surface_treatmentOXIDE FILM OVERALL
nominal_cutting_diameter0.2188 INCHES IN
NSN5133-01-095-6721
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN NAS907 TYFSZ7/32 MFR DRILL,TWIST
KEY FEATURES
•
SHANK DIAMETER: 0.219 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 1.250 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.2188 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: F TYPE
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.219 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH1.250 INCHES NOMINAL IN
OVERALL LENGTH2.375 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.2188 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAF TYPE
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 5
NAS907Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
M40CO 7/32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
35082Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3311 7/32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40314Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NAS907 TYFSZ7/32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS907 TYFSZ7/32?
NAS907 TYFSZ7/32 is a DRILL,TWIST.
What parts can replace NAS907 TYFSZ7/32?
There are 5 known substitutes for NAS907 TYFSZ7/32: NAS907, M40CO 7/32, 35082 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS907 TYFSZ7/32?
NAS907 TYFSZ7/32 is cataloged in the U.S. Government catalog under NSN 5133-01-095-6721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS907 TYFSZ7/32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.