PartsTable
Technical Data Sheet
Download PDF

NAS907 TYBSZ40 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

NAS907 TYBSZ40: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 1.375 INCHES NOMINAL IN, overall_length: 12.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-595-8849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS907 TYBSZ40
NSN: 5133-00-595-8849
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.375 INCHES NOMINAL IN
flute_quantity2
overall_length12.000 INCHES NOMINAL IN
shank_diameter0.098 INCHES NOMINAL IN
special_featuresAIRCRAFT EXTENSION TYPE; WIRE SIZE 40
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.0980 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-00-595-8849
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN NAS907 TYBSZ40 MFR DRILL,TWIST
KEY FEATURES
•
SHANK DIAMETER: 0.098 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 1.375 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.0980 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 40 SIZE
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.098 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH1.375 INCHES NOMINAL IN
OVERALL LENGTH12.000 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.0980 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAB TYPE AND 40 SIZE
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 7
5133PL1020400Reference document
Same NSN cross-reference
Reference document — Informative reference only
C13244Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
06063Reference document
Same NSN cross-reference
Reference document — Secondary reference
C06063Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS907Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
3957-12 40Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NAS907 TYBSZ40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS907 TYBSZ40?
NAS907 TYBSZ40 is a DRILL,TWIST.
What parts can replace NAS907 TYBSZ40?
There are 7 known substitutes for NAS907 TYBSZ40: 5133PL1020400, C13244, 06063 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS907 TYBSZ40?
NAS907 TYBSZ40 is cataloged in the U.S. Government catalog under NSN 5133-00-595-8849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS907 TYBSZ40