Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, open_end_inside_diameter: 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN, closed_end_overall_diameter: 0.717 INCHES MINIMUM AND 0.737 INCHES MAXIMUM IN, material_document_and_classification: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-104-0372, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NAS834-64
NSN:5340-01-104-0372 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
material
PLASTIC, POLYETHYLENE (PP)
length_under_shoulder
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
open_end_inside_diameter
0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
closed_end_overall_diameter
0.717 INCHES MINIMUM AND 0.737 INCHES MAXIMUM IN
material_document_and_classification
L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
NSN
5340-01-104-0372
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
CLOSED END OVERALL DIAMETER: 0.717 INCHES MINIMUM AND 0.737 INCHES MAXIMUM IN
•
LENGTH UNDER SHOULDER: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
OPEN END INSIDE DIAMETER: 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
PLASTIC, POLYETHYLENE (PP)
CLOSED END OVERALL DIAMETER
0.717 INCHES MINIMUM AND 0.737 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS834-64?
NAS834-64 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace NAS834-64?
There are 23 known substitutes for NAS834-64: 102C1279-1, 8028447, 353122-4 and 20 more. Substitute compatibility should be verified for your specific system.
Is NAS834-64 still available?
NAS834-64 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.