PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS816-36
NAS816-36 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, length_under_shoulder: 0.312 INCHES NOMINAL IN, open_end_inside_diameter: 0.354 INCHES NOMINAL IN, closed_end_overall_diameter: 0.367 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-902-7811, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS816-36
NSN: 5340-00-902-7811
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialPLASTIC
length_under_shoulder0.312 INCHES NOMINAL IN
open_end_inside_diameter0.354 INCHES NOMINAL IN
closed_end_overall_diameter0.367 INCHES NOMINAL IN
NSN5340-00-902-7811
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS816-36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 0.367 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 0.354 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
LENGTH UNDER SHOULDER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CLOSED END OVERALL DIAMETER0.367 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER0.354 INCHES NOMINAL IN
MATERIALPLASTIC
LENGTH UNDER SHOULDER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
E11662Interchangeable
interchangeable cross-reference
interchangeable
M219ZCE1TX9Interchangeable
interchangeable cross-reference
interchangeable
700612Interchangeable
interchangeable cross-reference
interchangeable
0271C0006-12Interchangeable
interchangeable cross-reference
interchangeable
7040-512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS816-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS816-36?
NAS816-36 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace NAS816-36?
There are 5 known substitutes for NAS816-36: E11662, M219ZCE1TX9, 700612 and 2 more. Substitute compatibility should be verified for your specific system.
Is NAS816-36 still available?
NAS816-36 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS816-36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026