PartsTable
Technical Data Sheet
Download PDF

NAS5313E08-3H — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS5313E08-3H: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_height: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, head_diameter: 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, hole_diameter: 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, thread_length: 0.276 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-648-3013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS5313E08-3H
NSN: 5305-01-648-3013
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
hole_typeDRILLED
head_height0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
head_diameter0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hole_diameter0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
thread_length0.276 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.464 INCHES NOMINAL IN
special_featuresDRIVE SIZE: T20
thread_directionRIGHT-HAND
end_item_identificationF-35 AIRCRAFT
nominal_thread_diameter0.1640 INCHES IN
shank_surface_treatmentPASSIVATE OR CADMIUM
NSN5305-01-648-3013
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS5313E08-3H · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.464 INCHES NOMINAL IN
•
THREAD LENGTH: 0.276 INCHES NOMINAL IN
•
SHANK SURFACE TREATMENT: PASSIVATE OR CADMIUM
•
NOMINAL THREAD DIAMETER: 0.1640 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
FASTENER LENGTH0.464 INCHES NOMINAL IN
THREAD LENGTH0.276 INCHES NOMINAL IN
SHANK SURFACE TREATMENTPASSIVATE OR CADMIUM
NOMINAL THREAD DIAMETER0.1640 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
SPECIAL FEATURESDRIVE SIZE: T20
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW, SHEAR, FLAT FILLISTER HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS 1800 SIX LOBE RECESS, 95 KSI FSU
END ITEM IDENTIFICATIONF-35 AIRCRAFT
SUBSTITUTES & CROSS-REFERENCES 1
NAS5313Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAS5313E08-3H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS5313E08-3H?
NAS5313E08-3H is a SCREW,MACHINE.
What parts can replace NAS5313E08-3H?
There is 1 known substitute for NAS5313E08-3H: NAS5313. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS5313E08-3H?
NAS5313E08-3H is cataloged in the U.S. Government catalog under NSN 5305-01-648-3013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS5313E08-3H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.