PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS464P4-37
NAS464P4-37 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL, head_style: HEXAGON, grip_length: 2.312 INCHES NOMINAL IN, head_height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-2334, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS464P4-37
NSN: 5306-00-207-2334
FSC: 5306
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
head_styleHEXAGON
grip_length2.312 INCHES NOMINAL IN
head_height0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
thread_length0.327 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
fastener_length2.640 INCHES MINIMUM AND 2.687 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
NSN5306-00-207-2334
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS464P4-37 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SINGLE SHEAR STRENGTH: ERR-060
•
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.516 INCHES MINIMUM AND 2.484 INCHES MAXIMUM FIRST HOLE IN
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 28
•
FASTENER LENGTH: 2.640 INCHES MINIMUM AND 2.687 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
SINGLE SHEAR STRENGTHERR-060
GRIP DIAMETER0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.516 INCHES MINIMUM AND 2.484 INCHES MAXIMUM FIRST HOLE IN
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH28
FASTENER LENGTH2.640 INCHES MINIMUM AND 2.687 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1011805Interchangeable
interchangeable cross-reference
interchangeable
A6915Interchangeable
interchangeable cross-reference
interchangeable
2006567Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS464P4-37?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS464P4-37?
NAS464P4-37 is a BOLT,SHEAR.
What parts can replace NAS464P4-37?
There are 3 known substitutes for NAS464P4-37: 1011805, A6915, 2006567. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS464P4-37?
NAS464P4-37 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-2334. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS464P4-37

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026