PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS463YKDD10H
NAS463YKDD10H ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 1.049 INCHES MINIMUM AND 1.079 INCHES MAXIMUM IN, plate_width: 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN, plate_thickness: 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN, thru-hole_diameter: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-815-6183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS463YKDD10H
NSN: 5310-00-815-6183
FSC: 5310
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL
nut_stylePLATE NUT SPACER
nut_length1.049 INCHES MINIMUM AND 1.079 INCHES MAXIMUM IN
plate_width0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
plate_thickness0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
thru-hole_diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionCOUNTERSUNK HOLES
mounting_provision_locationNUT PROJECTION SIDE
mounting_hole_arrangement_style2 HOLES
mounting_hole_countersink_angle100.0 DEGREES NOMINAL
material_document_and_classificationQQ-A-250/3,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,T3 OR T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 3RD MATERIAL RESPONSE OVERALL
NSN5310-00-815-6183
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS463YKDD10H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 1.049 INCHES MINIMUM AND 1.079 INCHES MAXIMUM IN
•
NUT STYLE: PLATE NUT SPACER
•
MOUNTING PROVISION LOCATION: NUT PROJECTION SIDE
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/3,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,T3 OR T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL
•
PLATE THICKNESS: 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
NUT MOUNTING PROVISION: COUNTERSUNK HOLES
TECHNICAL CHARACTERISTICS (FLIS)
NUT LENGTH1.049 INCHES MINIMUM AND 1.079 INCHES MAXIMUM IN
NUT STYLEPLATE NUT SPACER
MOUNTING PROVISION LOCATIONNUT PROJECTION SIDE
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/3,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,T3 OR T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL
PLATE THICKNESS0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
NUT MOUNTING PROVISIONCOUNTERSUNK HOLES
THRU-HOLE DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
101-2173-1Interchangeable
interchangeable cross-reference
interchangeable
7717-107NWHTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS463YKDD10H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS463YKDD10H?
NAS463YKDD10H is a NUT SPACER,PLATE.
What parts can replace NAS463YKDD10H?
There are 2 known substitutes for NAS463YKDD10H: 101-2173-1, 7717-107NWHT. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS463YKDD10H?
NAS463YKDD10H is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-815-6183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS463YKDD10H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026