PartsTable
Technical Data Sheet
PartsTable / MRO / NAS4117C45
NAS4117C45 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The NAS4117C45 is a the manufacturer industrial component. Key specifications include overall_width: 0.747 INCHES MINIMUM AND 0.747 INCHES MINIMUM AND 0.777 INCHES MAXIMUM0.777 INCHES MAXIMUM IN, overall_length: 1.297 INCHES MINIMUM AND 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM1.327 INCHES MAXIMUM IN, special_features: BORON NITRIDE-FILLED SILICONE RUBBER, specification/standard_data: 81349-MIL-H-87111/1 GOVERNMENT SPECIFICATION, unthreaded_mounting_hole_diameter: 0.062 INCHES NOMINAL SECOND MOUNTING FACILITY IN, mounting_facility_type_and_quantity: 2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-419-4995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ NAS4117C45
NSN: 5999-01-419-4995
FSC: 5999
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
overall_width0.747 INCHES MINIMUM AND 0.747 INCHES MINIMUM AND 0.777 INCHES MAXIMUM0.777 INCHES MAXIMUM IN
overall_length1.297 INCHES MINIMUM AND 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM1.327 INCHES MAXIMUM IN
special_featuresBORON NITRIDE-FILLED SILICONE RUBBER
specification/standard_data81349-MIL-H-87111/1 GOVERNMENT SPECIFICATION
unthreaded_mounting_hole_diameter0.062 INCHES NOMINAL SECOND MOUNTING FACILITY IN
mounting_facility_type_and_quantity2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
NSN5999-01-419-4995
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN NAS4117C45 MFR NAS4117C45
KEY FEATURES
•
TEST DATA DOCUMENT: 81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.062 INCHES NOMINAL SECOND MOUNTING FACILITY IN
TECHNICAL CHARACTERISTICS (FLIS)
TEST DATA DOCUMENT81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIAL FEATURESBORON NITRIDE-FILLED SILICONE RUBBER
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.062 INCHES NOMINAL SECOND MOUNTING FACILITY IN
UNTHREADED MOUNTING HOLE DIAMETER0.140 INCHES NOMINAL FIRST MOUNTING FACILITY IN
OVERALL LENGTH1.297 INCHES MINIMUM AND 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM1.327 INCHES MAXIMUM IN
OVERALL WIDTH0.747 INCHES MINIMUM AND 0.747 INCHES MINIMUM AND 0.777 INCHES MAXIMUM0.777 INCHES MAXIMUM IN
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY
SPECIFICATION/STANDARD DATA81349-MIL-H-87111/1 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
MIL-M-87111/1Upgraded Successor
successor cross-reference
successor
M87111/1-1H03Upgraded Successor
successor cross-reference
successor
M87111/01-1H03Upgraded Successor
successor cross-reference
successor
M87111/01-1H02Upgraded Successor
successor cross-reference
successor
M87111/1-H02Upgraded Successor
successor cross-reference
successor
M87111/1-1H0Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy NAS4117C45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS4117C45?
NAS4117C45 is a NAS4117C45. It is classified as a MRO (MRO_GENERAL).
What parts can replace NAS4117C45?
There are 22 known substitutes for NAS4117C45: MIL-M-87111/1, M87111/1-1H03, M87111/01-1H03 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS4117C45?
NAS4117C45 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-419-4995. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS4117C45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026