PartsTable
Technical Data Sheet
Download PDF

NAS388-10-10P — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS388-10-10P: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: OVAL, thread_class: 2A A, head_diameter: 0.372 INCHES NOMINAL IN, thread_length: 0.509 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-932-0405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS388-10-10P
NSN: 5305-00-932-0405
NIINs: 009320405, 010746469
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleOVAL
thread_class2A A
head_diameter0.372 INCHES NOMINAL IN
thread_length0.509 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCHROMIUM
thread_quantity_per_inch32
NSN5305-00-932-0405
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS388-10-10P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CHROMIUM
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.509 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS388 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCHROMIUM
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.509 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS388 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 1
411-029-110Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NAS388-10-10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS388-10-10P?
NAS388-10-10P is a SCREW,MACHINE.
What parts can replace NAS388-10-10P?
There is 1 known substitute for NAS388-10-10P: 411-029-110. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS388-10-10P?
NAS388-10-10P is cataloged in the U.S. Government catalog under NSN 5305-00-932-0405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS388-10-10P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.