NAS1921-B04-S03 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

NAS1921-B04-S03: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 EXPANDER, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING, shank_diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, shear_strength: 495 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-099-1001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1921-B04-S03

NSN: 5320-01-099-1001
FSC: 5320 — Rivets
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 2024 EXPANDER
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING
shank_diameter	0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
shear_strength	495 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.323 INCHES NOMINAL IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	ANODIZE EXPANDER
head_major_diameter	0.225 INCHES NOMINAL IN
minimum_tensile_strength	325 POUNDS PER SQUARE INCH LBS
NSN	5320-01-099-1001

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.323 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING

•

SURFACE TREATMENT: ANODIZE EXPANDER

•

MINIMUM TENSILE STRENGTH: 325 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
FASTENER LENGTH	0.323 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING
SURFACE TREATMENT	ANODIZE EXPANDER
MINIMUM TENSILE STRENGTH	325 POUNDS PER SQUARE INCH LBS
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SHEAR STRENGTH	495 SINGLE POUNDS PER SQUARE INCH

SUBSTITUTES & CROSS-REFERENCES 3

MLS100-B04-S03Reference document

Same NSN cross-reference

Reference document — Secondary reference

MLSP-B04S03Reference document

Same NSN cross-reference

Reference document — Secondary reference

SMLS100-B04-03Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy NAS1921-B04-S03?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1921-B04-S03?

NAS1921-B04-S03 is a RIVET,BLIND.

What parts can replace NAS1921-B04-S03?

There are 3 known substitutes for NAS1921-B04-S03: MLS100-B04-S03, MLSP-B04S03, SMLS100-B04-03. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1921-B04-S03?

NAS1921-B04-S03 is cataloged in the U.S. Government catalog under NSN 5320-01-099-1001. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1921-B04-S03 — RIVET,BLIND

Request a Quote — NAS1921-B04-S03