PartsTable
Technical Data Sheet
Download PDF

NAS1801-4-32 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS1801-4-32: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 1.920 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN, screw_material: STEEL COMP E4340 OR STEEL COMP 8740, fastener_length: 1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-212-4523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1801-4-32
NSN: 5305-01-212-4523
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_class3A A
thread_length1.920 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
screw_materialSTEEL COMP E4340 OR STEEL COMP 8740
fastener_length1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5305-01-212-4523
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1801-4-32 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 1.920 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH1.920 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS1801 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAS1801-4-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1801-4-32?
NAS1801-4-32 is a SCREW,MACHINE.
What is the NSN for NAS1801-4-32?
NAS1801-4-32 is cataloged in the U.S. Government catalog under NSN 5305-01-212-4523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1801-4-32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.