PartsTable
Technical Data Sheet
Download PDF

NAS1801-3-12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS1801-3-12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.672 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, screw_material: STEEL COMP E4340 OR STEEL COMP 8740, fastener_length: 0.734 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-073-9162, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1801-3-12
NSN: 5305-01-073-9162
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class3A A
thread_length0.672 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
screw_materialSTEEL COMP E4340 OR STEEL COMP 8740
fastener_length0.734 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_between_flats0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-01-073-9162
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1801-3-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.734 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.672 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.734 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH0.672 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS1801 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 3
5305PL0783160Reference document
Same NSN cross-reference
Reference document — Informative reference only
BACS12CB3-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
10114957Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1801-3-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1801-3-12?
NAS1801-3-12 is a SCREW,MACHINE.
What parts can replace NAS1801-3-12?
There are 3 known substitutes for NAS1801-3-12: 5305PL0783160, BACS12CB3-12, 10114957. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1801-3-12?
NAS1801-3-12 is cataloged in the U.S. Government catalog under NSN 5305-01-073-9162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1801-3-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.