NAS1719H4L2A: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.050 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN, shear_strength: 450 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-552-3282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM SLEEVE |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.050 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN |
| shear_strength | 450 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.390 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | ANODIZE OVERALL |
| head_major_diameter | 0.196 INCHES MAXIMUM IN |
| specification/standard_data | 80205-NAS1719 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| NSN | 5320-01-552-3282 |
| SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.390 INCHES MAXIMUM IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 80205-NAS1719 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| GRIP LENGTH | 0.050 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.