PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1714
NAS1714 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 0.4375 INCHES NOMINAL IN, loop_length: 1.1675 INCHES NOMINAL IN, temp_rating: -320.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, overall_width: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-158-3920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1714
NSN: 5340-00-158-3920
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
loop_width0.4375 INCHES NOMINAL IN
loop_length1.1675 INCHES NOMINAL IN
temp_rating-320.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
overall_width0.500 INCHES NOMINAL IN
special_featuresCUSHION TEMP RATING -40.0 F TO 212.0 F
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.204 INCHES NOMINAL IN
material_diameter0.015 INCHES NOMINAL IN
surface_treatmentPASSIVATE BAND
NSN5340-00-158-3920
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1714 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
LOOP WIDTH: 0.563 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1714 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL CORROSION RESISTING BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP WIDTH0.563 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS1714 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MATERIALRUBBER SYNTHETIC CUSHION
STYLE DESIGNATORMULTIPLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END1.272 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES

No verified substitutes available.

LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1714?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1714?
NAS1714 is a CLAMP,LOOP.
What is the NSN for NAS1714?
NAS1714 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-158-3920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1714

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026