PartsTable
Technical Data Sheet
Download PDF

NAS1712D24-48N — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NAS1712D24-48N: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, loop_width: 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN, loop_length: 2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN, overall_width: 0.50 INCHES NOMINAL IN, style_designator: RECTANGULAR, surface_treatment: RUBBER CHLOROPRENE CLASS CR OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-734-1212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1712D24-48N
NSN: 5340-01-734-1212
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
loop_width1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
loop_length2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
overall_width0.50 INCHES NOMINAL IN
style_designatorRECTANGULAR
surface_treatmentRUBBER CHLOROPRENE CLASS CR OVERALL
material_thickness0.032 INCHES NOMINAL IN
material_document_and_classificationAMS-QQ-A-250/5 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end2.091 INCHES MINIMUM AND 2.151 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyCLAMP LOOP CUSHIONED RECTANGULAR
surface_treatment_document_and_classificationAMS3209 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_loop_and_mounting_hole1.872 INCHES MINIMUM AND 1.932 INCHES MAXIMUM IN
NSN5340-01-734-1212
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1712D24-48N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS3209 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
LOOP WIDTH: 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-250/5 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.091 INCHES MINIMUM AND 2.151 INCHES MAXIMUM IN
•
SURFACE TREATMENT: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS3209 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
LOOP WIDTH1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-250/5 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.50 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.091 INCHES MINIMUM AND 2.151 INCHES MAXIMUM IN
SURFACE TREATMENTRUBBER CHLOROPRENE CLASS CR OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP LOOP CUSHIONED RECTANGULAR
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.872 INCHES MINIMUM AND 1.932 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
NAS1712Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1712D24-48N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1712D24-48N?
NAS1712D24-48N is a CLAMP,LOOP.
What parts can replace NAS1712D24-48N?
There is 1 known substitute for NAS1712D24-48N: NAS1712. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1712D24-48N?
NAS1712D24-48N is cataloged in the U.S. Government catalog under NSN 5340-01-734-1212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1712D24-48N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.