PartsTable
Technical Data Sheet
Download PDF

NAS1613-015 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NAS1613-015: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.671 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-051-1799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1613-015
NSN: 5330-01-051-1799
FSC: 5330 — Packing and Gasket Materials
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.671 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-051-1799
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1613-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
PERIPHERAL DIAMETER: 0.671 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZY
PERIPHERAL DIAMETER0.671 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 5
AS568-015E540-8Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
NAS1613-015CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-015E540-8CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AC-A665EP-2 ITEM 5CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AC-A665EP-2 ITEM 5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAS1613-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1613-015?
NAS1613-015 is a PACKING,PREFORMED.
What parts can replace NAS1613-015?
There are 5 known substitutes for NAS1613-015: AS568-015E540-8, NAS1613-015CP, AS568-015E540-8CP and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1613-015?
NAS1613-015 is cataloged in the U.S. Government catalog under NSN 5330-01-051-1799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1613-015