The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, end_item_identification: T20 CESSNA CITATION V. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-693-5907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NAS1611-328
NSN:5331-01-693-5907 FSC:5331 — O-ring CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
material
RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating
-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating
80.0 SHORE DUROMETER A NOMINAL
center_hole_diameter
1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
cross-sectional_height
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
end_item_identification
T20 CESSNA CITATION V
material_document_and_classification
NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency
O-RING
NSN
5331-01-693-5907
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
TEMP RATING
-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING
80.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER
1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
O-RING
END ITEM IDENTIFICATION
T20 CESSNA CITATION V
MATERIAL
RUBBER ETHYLENE-PROPYLENE CLASS EPM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1611-328?
NAS1611-328 is a O-RING.
What parts can replace NAS1611-328?
There is 1 known substitute for NAS1611-328: NAS1613. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1611-328?
NAS1611-328 is cataloged in the U.S. Government catalog under NSN 5331-01-693-5907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.