NAS1611-173A — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NAS1611-173A: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 8.437 INCHES MINIMUM AND 8.537 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: AN/AQS-24A A. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-558-3296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1611-173A

NSN: 5331-01-558-3296
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	8.437 INCHES MINIMUM AND 8.537 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification	AN/AQS-24A A
material_document_and_classification	CAGEC 02697.E1267 MFR REF SINGLE MATERIAL RESPONSE
NSN	5331-01-558-3296

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: CAGEC 02697.E1267 MFR REF SINGLE MATERIAL RESPONSE

•

CENTER HOLE DIAMETER: 8.437 INCHES MINIMUM AND 8.537 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	CAGEC 02697.E1267 MFR REF SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER	8.437 INCHES MINIMUM AND 8.537 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	AN/AQS-24A A
MATERIAL	RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM

OTHER ITEMS IN FSC 5331 — O-ring

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924

SUBSTITUTES & CROSS-REFERENCES 5

2-173 E1267-80Reference document

Same NSN cross-reference

Reference document — Secondary reference

E1267 2-173Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-173 E1267-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

E1267-80 2-173Reference document

Same NSN cross-reference

Reference document — Secondary reference

E1267-8 2-173Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1611-173A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1611-173A?

NAS1611-173A is a O-RING.

What parts can replace NAS1611-173A?

There are 5 known substitutes for NAS1611-173A: 2-173 E1267-80, E1267 2-173, 2-173 E1267-8 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1611-173A?

NAS1611-173A is cataloged in the U.S. Government catalog under NSN 5331-01-558-3296. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1611-173A — O-RING

Request a Quote — NAS1611-173A