NAS1611-125 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NAS1611-125: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN, special_features: CLEAN IAW MIL-STD-1330, center_hole_diameter: 1.287 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-014-1225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1611-125

NSN: 5331-01-014-1225
NIINs: 010141225, 014512234
FSC: 5331 — O-ring
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
special_features	CLEAN IAW MIL-STD-1330
center_hole_diameter	1.287 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-01-014-1225

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 1.287 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	1.287 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 4

2-127E515-80Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1601-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1613Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-127E515-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy NAS1611-125?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1611-125?

NAS1611-125 is a O-RING.

What parts can replace NAS1611-125?

There are 4 known substitutes for NAS1611-125: 2-127E515-80, NAS1601-125, NAS1613 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1611-125?

NAS1611-125 is cataloged in the U.S. Government catalog under NSN 5331-01-014-1225. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1611-125 — O-RING

Request a Quote — NAS1611-125