NAS1611-003 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NAS1611-003: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, special_features: WEAPONS SYSTEM ESSENTIAL, peripheral_diameter: 0.166 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN, center_hole_diameter: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-092-0254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1611-003

NSN: 5331-01-092-0254
NIINs: 010920254, 012817675, 012887156
FSC: 5331 — O-ring
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
special_features	WEAPONS SYSTEM ESSENTIAL
peripheral_diameter	0.166 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
center_hole_diameter	0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
cross-sectional_height	0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
criticality_code_justification	ZZZY
material_document_and_classification	NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristics	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN	5331-01-092-0254

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN

•

CENTER HOLE DIAMETER: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
CENTER HOLE DIAMETER	0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 6

NAS1611-003SH0R EReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

5331PL1259522Reference document

Same NSN cross-reference

Reference document — Informative reference only

NAS1613Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

59620 PIECE 3/4 IN VLReference document

Same NSN cross-reference

Reference document — Secondary reference

2-003-E798-70Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SHORE A 80Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1611-003?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1611-003?

NAS1611-003 is a O-RING.

What parts can replace NAS1611-003?

There are 6 known substitutes for NAS1611-003: NAS1611-003SH0R E, 5331PL1259522, NAS1613 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1611-003?

NAS1611-003 is cataloged in the U.S. Government catalog under NSN 5331-01-092-0254. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1611-003 — O-RING

Request a Quote — NAS1611-003